charlesvestalv0.1.23 on GitHub
Junologue Chorus is a Schwung module for the Ableton Move, ported by charlesvestal from Peter Allwin's original, that adds a Roland Juno-60 style BBD chorus as an audio effect. It offers the three classic chorus modes, I, I+II and II, driven by two triangle LFOs at fixed rates. Knobs set the mode, dry/wet mix and brightness, and it can be used in Signal Chain patches.
firmwaregithub.com
DJ Deck by DJ Hard Rich is a Schwung module for the Ableton Move that turns it into a CDJ and turntable-style dual-deck DJ player with four stems per deck. It offers timestretch and pitchshift, hot cues, loops, stutter, slip mode and BPM sync, and plays audio files as well as tracker modules split into channel stems. It takes over the Move's pads, knobs and display, and is built for use with an external DJ mixer.
firmwaregithub.com
Move Bitwig is a Schwung overtake module for the Ableton Move by pi43r that turns the Move into a hardware controller for Bitwig Studio 6. It lets you launch clips and scenes, play melodic or drum pads, and edit a 16-step sequence on the selected track. The Move also browses devices and presets and adjusts the mixer, and it needs a controller script installed in Bitwig.
firmwaregithub.com
TB-3PO is a Schwung module for the Ableton Move by djphazer / Hemisphere Suite, ported by charlesvestal from djphazer's original, that turns the Move into a generative 303-style acid bassline sequencer. Two independent slots each generate scale-locked patterns with density, accent and slide probabilities, pattern banks, mutation and several playback directions. It sends MIDI only, so each slot drives a synth on its own channel, and a 303 mode sends live CCs from the knobs to a compatible 303 synth.
firmwaregithub.com
Dexed is a Schwung module for the Ableton Move, ported by charlesvestal from Google and asb2m10's original, that turns the Move into a 6-operator FM synthesizer in the style of the DX7. It loads standard 32-voice .syx patch banks and plays 16 voices with velocity and aftertouch response. LFO settings, feedback, and individual operator levels can be adjusted live.
firmwaregithub.com
REX Player is a Schwung module for the Ableton Move by charlesvestal that plays Propellerhead ReCycle loop files as a sound generator. Each slice in a loop is mapped to its own MIDI note so it can be played from the Move's pads. It reads mono and stereo .rx2 files, while older .rex and .rcy formats are not supported.
firmwaregithub.com
Libpo32 by mestela is a Schwung module for the Ableton Move that turns it into a 16-voice drum synthesizer laid out on the General Music drum map, with each pad a separate synthesis voice. Every voice has controls for waveform, pitch, decay, distortion, and a filtered noise generator with selectable envelope shapes. A role-aware randomizer keeps kicks, hats, and other pads within sounds suited to them, and custom kits can be saved.
firmwaregithub.com
Performance FX is a Schwung module for the Ableton Move by charlesvestal that turns the pads into a live punch-in effects processor. Hold a pad to engage one of 32 effects such as beat repeat, filter sweeps, delays, reverbs and distortion, with pad pressure shaping the intensity. Shift latches an effect on, and knobs adjust per-effect parameters, tilt EQ and a DJ filter.
firmwaregithub.com
Osirus is a Schwung module for the Ableton Move by dsp56300/gearmulator, ported by charlesvestal, that turns the Move into an Access Virus emulation running the original Virus firmware from a user-supplied ROM. It offers 8 banks of 128 presets, filter and envelope controls, and user presets. A browser-based editor gives full patch editing of oscillators, filters, LFOs and the mod matrix. Only Virus A ROMs are supported.
firmwaregithub.com
Airwindows is a Schwung module for the Ableton Move by charlesvestal, ported from Chris Johnson's original Airwindows effects collection. It turns the Move into a host for hundreds of audio effects, from consoles, tape, and reverbs to saturation and filters. Effects are browsed by category and adjusted with the encoders, either in a Signal Chain or on their own.
firmwaregithub.com
RNBO for Schwung runs patches made with Cycling '74's RNBO on the Ableton Move through the Schwung framework, in two ways. As a takeover tool, RNBO Runner starts the RNBO runner stack inside Schwung, giving RNBO patchers the Move's pads, knobs, display and LEDs, mixing their audio into the Move's output and serving the runner's browser panel for graph and preset management. As signal-chain modules, it loads exported RNBO packs as synths or audio effects alongside other Schwung modules. A pack copied into the synth or effect folder on the Move is unpacked at startup, its connected patchers are wired together and processed in order, the pads play synth graphs and the pack's parameter views map to the Move's knobs. Packs are created in Max with RNBO by targeting the Move runner, and the takeover mode needs Cycling '74's RNBO runner installed on the Move plus a companion JACK driver.
firmwaregithub.com
Braids is a Schwung module for the Ableton Move, ported by charlesvestal from Emilie Gillet's original, that turns the Move into a macro oscillator sound generator. It offers a wide set of synthesis algorithms covering analog waveforms, FM, physical modeling and noise, played with four voices. Each voice has an AR envelope and a filter, with the knobs controlling engine, timbre, color, and envelope.
firmwaregithub.com
AirPlay is a Schwung module for the Ableton Move by charlesvestal that turns the Move into an AirPlay audio receiver. Audio streamed from an iPhone, iPad, or Mac appears in a signal chain slot as a sound generator, so audio effects can be added and a gain knob adjusted. It needs a WiFi network shared with the sending device.
firmwaregithub.com
Dronage Move by boorch is a Schwung module for the Move that turns it into an ambient drone workstation, taking over the Move's controls and screen. It has four drone or sequenced voices with per-voice filter, EQ and drive, plus shared delay, reverb and dirt. Eight LFOs, eight macros, per-step parameter locks and eight scenes drive the music through modulation rather than recorded notes.
firmwaregithub.com
OB-Xd is a Schwung module for the Ableton Move by reales, ported by charlesvestal from Filatov Vadim's original, that turns the Move into a polyphonic virtual analog synthesizer emulating the Oberheim OB-X. It has saw and pulse oscillators, a resonant four-pole filter, an LFO, ADSR envelopes and per-voice analog variation. Parameters are grouped into categories on the knobs, with a graphical panel in the browser that mirrors the faceplate.
firmwaregithub.com
SF2 Synth is a Schwung module for the Ableton Move by charlesvestal, ported from Robin Lobel's FluidLite, that turns the Move into a polyphonic SoundFont player. It loads .sf2 files you supply, lets you browse presets with the jog wheel, and switches between soundfonts with Shift plus Left/Right. Pads are velocity sensitive, with pitch bend and octave transpose.
firmwaregithub.com
Bloom is a Schwung overtake module for the Ableton Move by bondobd that turns the pads into a key-aware chord instrument in the spirit of the Orchid. Chord pads, a strum plate, colour row and wheel voicings let you play, while steps store per-chord strum, arp, pulse and bass settings. Record lays the chords and bass into clips on Move tracks, locked to Move's clock.
firmwaregithub.com
TinyPro5 by fleshinachair is a Schwung module for the Ableton Move that turns it into a five-voice virtual analog polysynth modeled on the Prophet-5 Rev 2. It has two hard-synced oscillators, an SSM-style filter, Poly-Mod and per-voice drift, with Poly, Unison, Mono and Legato modes. It includes a factory preset bank and can load Repro-5 .h2p and Prophet-5 .syx patches.
firmwaregithub.com
Forge is a Schwung module for the Ableton Move by filliformes, turning the Move into an FM and subtractive hybrid drum synthesizer. Five voice algorithms, a self-oscillating ladder filter, a dedicated noise layer and a per-voice resonator shape the sound. A Kit A to B morph across the 16 pads and Ctrl-All performance macros allow live kit changes, with three FX buses.
firmwaregithub.com
Surge XT is a Schwung module for the Ableton Move, ported by charlesvestal from the Surge Synth Team's original, that turns the Move into a hybrid synthesizer. It combines wavetable, FM, subtractive, and physical modeling oscillators with dual filters, LFOs, and envelopes. Presets are browsed with the jog wheel, and the knobs adjust parameters by category.
firmwaregithub.com
SID Control is a Schwung module for the Ableton Move by charlesvestal that turns the Move into a MIDI controller for the SIDaster III synthesizer, which connects over USB-A. Eight pages of knob-mapped parameters cover the global filter, tuning, and the three oscillators, switched with the step buttons. The pads play chromatic notes, and touching a knob shows the parameter name on screen.
No ratings yet — be the first to rate this patch.
