Sculpt is a four-track sculpting sampler for the Ableton Move, running as a tool in the Schwung framework. Each stereo track runs the same chain: a material stage that plays or slices a loaded or recorded sample in tape or polyphonic mode, a granular processor fed from a live buffer, a 48-band resonant filter bank, a colour stage with drive, bit crushing, compression and noise, and a space stage with delay and reverb, all shaped by four modulators per track that can be LFOs, sample-and-hold, drift, envelopes or followers.
The filter bank works as a morphing low-, band- and high-pass filter or as a tuned resonator that can follow a scale or the notes held on a track. Tracks record from the Move's audio input or resample Sculpt's own output, with bar-quantised loops and overdubbing, and the pads cue slices or play tracks chromatically. Scene slots store every track setting and morph from one to the next, hold-to-engage stutter, tape-stop, reverse and freeze effects sit on the step buttons, and sessions and recordings are saved on the Move. A browser simulator runs the same engine on a virtual Move.
REX Player is a Schwung module for the Ableton Move by charlesvestal that plays Propellerhead ReCycle loop files as a sound generator. Each slice in a loop is mapped to its own MIDI note so it can be played from the Move's pads. It reads mono and stereo .rx2 files, while older .rex and .rcy formats are not supported.
SF2 Synth is a Schwung module for the Ableton Move by charlesvestal, ported from Robin Lobel's FluidLite, that turns the Move into a polyphonic SoundFont player. It loads .sf2 files you supply, lets you browse presets with the jog wheel, and switches between soundfonts with Shift plus Left/Right. Pads are velocity sensitive, with pitch bend and octave transpose.
s3g Thru by s3g is a Schwung module for the Ableton Move that turns it into a four-lane stereo sampler and performance-data looper, taking over the Move's controls and screen. It offers multiple playback engines and eight polyphonic voices, with Single, Split, Shared Dual and Quad layouts for one to four independent instruments. Bank adds sixteen saved sample pads, and Layers pairs one keyboard with four parallel stereo effects.
Granny is a Schwung module for the Ableton Move by handcraftedcc that turns the Move into a granular sampler, playing short grains from a WAV file chosen in a file browser. It offers controls for position, grain size, density, spray and jitter, plus a scan control that moves through the file while a note is held. Grain window shapes and mono, portamento or poly voice modes shape the sound.
Multisampler is a Schwung module for the Ableton Move by charlesvestal, with the sfizz engine credited to sfztools, that turns the Move into a polyphonic multisample instrument player for SFZ and DecentSampler libraries. Large libraries such as grand pianos stream from storage instead of loading into RAM. Knobs control octave, gain, polyphony and per-library macros, and the jog wheel browses presets.
Concat is a Schwung module for the Ableton Move by Filliformes that turns the Move into a corpus-based concatenative synthesizer. It slices a sample library, maps the slices by timbre, and plays grain clouds from the slices nearest your position, from the pads, the map, or live line input. Corpora can be built and previewed in a web Corpus Builder served from the Move.
Capicola is a Schwung module for the Move, ported by charlesvestal from Heavylight Industries' original, that works as a live time-stretch and pitch-shift audio effect. It reduces incoming stereo to keyframes and replays them under independent time and pitch control. A transient detector snaps the read head back to the present, so stretched tails ring underneath while the output stays locked to the input's rhythm.
TinyScratch is a Schwung module for the Ableton Move by fleshinachair that turns the Move into a generative auto-scratcher. Each pad press writes a fresh turntable scratch for a sample, plays it in time with the transport, and lets you keep the clips you like. A choice of scratch styles, a Groove dial for keeping improvised scratches to a drum pattern, and red pads that cut the sound like a crossfader complete it.
Boris Granular is a Schwung module for the Ableton Move, ported by filliformes from Alessandro Gaiba's original, that works as a real-time granular audio effect. It records incoming audio into a circular buffer and spawns overlapping grains with random position, pitch, direction, volume, and panning, with a freeze option. Grain triggers can lock to MIDI clock tempo.
MrSample is a Schwung module for the Ableton Move by charlesvestal that turns the Move into a chromatic single-sample player. It loads one audio file and plays it polyphonically across the keyboard with pitch tracking, following the Move's Sampler workflow. An AHDSR envelope, multimode filter with LFO, and loop points with crossfade shape the sound.
Breakbeat by mestela is a Schwung module for the Ableton Move that loads WAV breaks, cuts them into eight slices, and rearranges them on the Move grid. A Complexity control sets how often slices change, while position anchors, retriggers, stretching and an optional B sample for phrase fills shape the result. Pads 1-16 play slices live, and timing follows the Move's MIDI clock, so Midi Sync must be set to Out.
Sample Slicer by Justin Joe is a Schwung module for the Move that works as a sampler, detecting transients in a loaded sample and splitting it into slices. Slices can be played polyphonically from the Move's pads.
Gresil is a Schwung module for the Ableton Move, ported by filliformes from Emilie Gillet's original Mutable Instruments Beads, that turns the Move into a granular texture processor. It offers up to 32 grains with per-grain randomization, a delay mode, and four tape and digital recording media. Grains and delay taps can follow the Move's MIDI clock, and a frozen buffer is saved with the set.
Verglas is a Schwung module for the Ableton Move, ported by filliformes from Emilie Gillet's original Mutable Instruments Clouds, that turns the Move into a granular audio processor. It offers granular, time-stretch, looping delay and spectral modes with feedback, reverb and freeze. Added output high-pass and low-pass filters, a low-shelf EQ and a soft limiter shape the result.
Structor by filliformes is a Schwung module for the Ableton Move that deconstructs incoming audio and rebuilds it as grains in a musique concrete style. Its reconstruction modes, per-grain randomization of envelope, density, size, time and pan, a timed random sequencer, a DJ filter, reverb and a set of presets shape the result.
Dissolver is a Schwung module for the Ableton Move by filliformes that turns incoming audio into evolving ambient pads. It analyzes the spectrum, discards phase, and rebuilds the sound with random phases, so drums, vocals, or guitars become breathing textures. Knobs control spectral gating, freeze, stretch, spread, evolution, decay tail, tone, and dry/wet mix.
War Bells is a Schwung module for the Ableton Move by seajay that works as a granular, glitch, delay and looper multi-effect. It offers effects with variations of their own, a shimmer reverb, a resonant filter, a tempo-synced Motion modulator and a generative Evolve control. A Hold sampler and a 60-second phrase looper let you capture and layer sounds, and a 16-slot bank saves presets along with their loops.
DJ Deck by DJ Hard Rich is a Schwung module for the Ableton Move that turns it into a CDJ and turntable-style dual-deck DJ player with four stems per deck. It offers timestretch and pitchshift, hot cues, loops, stutter, slip mode and BPM sync, and plays audio files as well as tracker modules split into channel stems. It takes over the Move's pads, knobs and display, and is built for use with an external DJ mixer.
Move Bitwig is a Schwung overtake module for the Ableton Move by pi43r that turns the Move into a hardware controller for Bitwig Studio 6. It lets you launch clips and scenes, play melodic or drum pads, and edit a 16-step sequence on the selected track. The Move also browses devices and presets and adjusts the mixer, and it needs a controller script installed in Bitwig.
TB-3PO is a Schwung module for the Ableton Move by djphazer / Hemisphere Suite, ported by charlesvestal from djphazer's original, that turns the Move into a generative 303-style acid bassline sequencer. Two independent slots each generate scale-locked patterns with density, accent and slide probabilities, pattern banks, mutation and several playback directions. It sends MIDI only, so each slot drives a synth on its own channel, and a 303 mode sends live CCs from the knobs to a compatible 303 synth.