
Deluge 1.3 ‘Derbyshire’ Firmware Hands-On Demo

firmwaregithub.com
BRIBELUGE is unofficial firmware for the Synthstrom Deluge aimed at groove, drum sound design and speed, built around getting more out of eight deep tracks. It adds synthesized drum engines that run on any kit row, from analog-style kick, snare, tom and cymbal voices to percussion engines with kit presets and a punchy kick engine with its own presets, plus an acid bass synth voice with accent and slide. The Deluge's envelopes, filters and effects work on top, and the engine settings can be parameter-locked, automated and modulated. For timing and sequencing it adds alternative swing styles on the tempo knob, a kit pattern store that steps each of a kit's first six rows through saved patterns and banks, drum fills on the TAP button, a mono step sequencer for synth, MIDI and CV tracks with per-note octave, slides and custom CV voltages, and an endless record mode that keeps recording past the end of the loop. Other additions include a rebuilt one-knob saturation, per-step sample start offset, separate delay feedback and tone controls, a kit-wide performance snapshot, pad guides that light up shortcuts, default instrument choices, and gate outputs that send a kit's bottom four rows to modular gear. It is aimed at Deluge units with the 7-segment display.
firmwaregithub.com
AUX Sends and USB Audio builds are experimental firmware builds for the Synthstrom Deluge that add two routing features for outboard gear and computers. AUX Sends turns the Deluge's two CV sockets into an auxiliary send bus: any clip can be sent to the sockets at its own level, independently of the main mix, as two mono sends or one stereo pair, with a master send level, automation, MIDI learn and gold-knob control on synth tracks. It works only on Deluge units with the 7-segment display, because the CV converter shares its connection with the OLED screen, and the CV sockets carry a narrower frequency range than the main outputs. The USB Audio build makes the Deluge a class-compliant USB audio interface alongside USB MIDI, with eight channels out and four in. Each synth, audio or kit track can be sent to its own mono channel or stereo pair and optionally removed from the Deluge's own outputs. Returning audio can be mixed into the song before its effects or used as an audio track's input and recorded like a line input, and a delay-compensation setting holds back the Deluge's own sound so tracks sent through external effects come back in time. While connected as an audio device, the Deluge cannot host a USB MIDI controller.
firmwaregithub.com
Owlet is experimental firmware for the Synthstrom Deluge built as a portable sound-design and resampling machine and a companion for external gear. It adds a broad set of effects: a beat-repeat, slicing and granular looper, a lightweight reverb, a three-band upward and downward compressor, sine and wavetable waveshapers, an allpass disperser, an automodulator, a noise-modulated comb-filter eroder, a channel-strip utility, and a harmonic tool that notches out a tracked frequency and adds it back as a clean sine. New oscillators include a pulse-width triangle and a family of procedural designs, among them scanned-synthesis, pulse-train voice, stochastic, staircase and self-synchronizing swarm oscillators. A unison-index modulation source spreads timbre across unison voices. For sampling and workflow it adds bounce in place for clips and tracks, a lookback sampler that saves the last seconds or bars of the input, the master mix or a single track after the fact, a choice of recording source for resampling the Deluge's own output, and sound cloning by pad gesture. It also adds gate and ping-pong sample modes, loop crossfades and per-step sample start offsets. Four global macros act as both modulation sources and destinations, and MIDI Follow gains a 16-control mod-knob map and switchable controller presets. Effects are designed to use no memory or CPU when switched off, and their menus require the horizontal menu option to be enabled.

firmwaregithub.com
mastertune is unofficial firmware for the Synthstrom Deluge built around an adjustable master tuning. The reference pitch can be set from 415.3 to 466.2 Hz in 0.1 Hz steps, for example 432 Hz, and everything that sounds follows it: synths, kits, samples, FM voices, audio clips (time-stretched so the tempo stays), CV outputs and external MIDI gear. A Scan view uses the microphone or line input as a tuner, tempo meter and key finder. DJ tools add a one-knob low-pass and high-pass filter, tempo sync to the BPM heard at the input and a nudge for lining up with an external player. It also lightens the audio engine's CPU load, adds a one-line CPU and voice monitor, and lets the Deluge act as a driverless stereo USB audio input and share its SD card over USB. Sound changes include smoother filters, shelving EQ, volume in half-decibel steps, an optional output limiter, reworked reverb and delay, a multi-tone frequency drone with binaural, monaural and isochronic modes, and extra arpeggiator modes, along with a song-change countdown and a song browser that groups saved versions.
firmwaregithub.com
Deluge Controller Firmware turns the Synthstrom Deluge into a USB controller and audio interface for a connected computer instead of a stand-alone groovebox. It exposes the Deluge's hardware to host software: pad presses, button presses and encoder turns are reported to the computer, and the computer sets the RGB color of every pad, the indicator LEDs, the gold-knob light bars, the OLED display contents and brightness, and the CV and gate outputs. The Deluge appears as a composite USB device with a serial control channel, a stereo 44.1 kHz audio interface and a USB MIDI port that carries the DIN MIDI connections. It has no sequencer or sound engine of its own. It is a base for developers writing host programs that use the Deluge as their control surface, following a documented message protocol.
firmwaregithub.com
Lama is an unofficial firmware build for the Synthstrom Deluge aimed at sound design, combining a large set of experimental effects and oscillators with its own filter, modulation and shaping tools. It adds a vowel filter mode that turns the low-pass filter into a formant filter gliding through eight vowels, and custom LFO shapes drawn on the pad grid with up to 64 points per cycle, bendable segments, undo and redo and a library of preset shapes. There is also an 8-bar LFO sync setting, and saturation and wavefold editors with asymmetry or symmetry, mix and a tone crossover that keeps the low end clean. A Bass Mono control narrows the stereo image below a chosen frequency, the EQ gains a mid band, and the table waveshaper gains a tone control. Around these sit a beat-repeat and granular looper, a multiband upward and downward compressor, sine and wavetable waveshapers, an allpass disperser and a comb-filter eroder, along with bounce in place, a lookback sampler that saves audio after the fact, gate and ping-pong sample modes, loop crossfades and four global macros. To make room, the six-operator FM engine, ring modulation and several experimental oscillators are removed, and songs that use them load with substitutes.
firmwaregithub.com
DelugeLite is a performance-focused firmware build for the Synthstrom Deluge with the 7-segment display. Its goal is to free internal memory and processing headroom so the instrument can play more voices and more samples at once. It removes features only where that saves the most CPU or RAM, and adds new ones only when they cost almost nothing at run time. It compiles out OLED screen support, which gives synthesis more fast memory but leaves an OLED unit's screen blank, and it uses a larger audio processing block to lower CPU load at the cost of a few milliseconds of extra output latency. It also fixes a crash that could occur when voices were culled while only audio clips were playing. It is built from source.
No ratings yet — be the first to rate this patch.